新成立以來，我國鋼材產量長期偏低，建議限制鋼材的使用，近年來，雖然建設部開始重視建筑樓承板，但傳統的實力是不容易改變的，在建筑技能的培養方面，教育制度設施和建筑規則已經落后，現行的建筑設計、施工技術和管理知識結構已經不能適應建筑工地的發展。

Since the founding of new China, China's steel output has been low for a long time, so the use of steel must be restricted. In recent years, although the Ministry of construction has begun to pay attention to building bearing plate, the traditional strength is not easy to change. In terms of building skills training, the education system, facilities and building rules have been backward Construction technology and management knowledge structure can not adapt to the development of construction site.

1、鋼構建筑需求很多專業配套材料的供應，如強面板，螺栓等等。這些在我國雖然已有生產，但其產業仍不成熟，在某種程度上，制約了樓承板建筑的發展。

1. Steel construction needs a lot of professional supporting materials supply, such as strong panel, bolts and so on. Although these have been produced in our country, the industry is still immature, to some extent, restricting the development of floor slab building.

   
   

2、在壓力作用下，鋼管和混凝土之間產生相互作用的緊箍力，使混凝土處于三向受壓的應力狀態下工作，大大提高了混凝土抗壓強度，改善了塑性，提高了抗震性能，而薄鋼管在混凝土擠壓下不易屈曲，提高了鋼管局部穩定性，使鋼材強度得到更好地發揮。據試驗研究，鋼管混凝土強度比單鋼管或同樣截面混凝土強度提高了好幾倍。

2. Under the pressure, the hoop force between steel tube and concrete is generated, which makes the concrete work in the stress state of three-dimensional compression, greatly improves the compressive strength of concrete, improves the plasticity, and improves the seismic performance, while the thin steel tube is not easy to buckle under the compression of concrete, improves the local stability of steel tube, and makes the steel strength fully play. According to the experimental research, the strength of CFST is several times higher than that of single steel tube or concrete with the same section.

3、新的樓承板規范中，反映了多年以來的研究成果，這些成果也是當前工程設計中經常遇到的問題，例如，鋼管結構的桿件和節點承載力、增加了空間圓管節點強度計算公式和矩形管或方管結構設計計算方法，以及一些構造規定。

3. The new code of floor bearing plate reflects the research results over the years, which are also the problems often encountered in the current engineering design, such as the bearing capacity of members and joints of steel tube structure, the addition of strength calculation formula of spatial circular tubular joints, the design calculation method of rectangular or square tube structure, and some structural regulations.

4、鋼與混凝土組合梁，增加了連續組合梁負彎矩部位的計算方法，樓承板為壓型組合板的組合梁計算和構造特點，以及部分抗剪連接的組合梁的設計規定。在構造要求中增加了大跨度屋蓋結構的設計和構造要求，增加了提高寒冷地區抗脆斷能力要求等。這些新規定是改進計算方法的一個重要方面。

4. For steel and concrete composite beams, the calculation method of negative moment position of continuous composite beams is added, the calculation and structural characteristics of composite beams with profiled floor bearing plates, and the design regulations of some composite beams with shear connection are also added. In the construction requirements, the design and construction requirements of large-span roof structure are added, and the requirements of improving the brittle fracture resistance in cold regions are added. These new regulations are an important aspect of improving the calculation method.